Equipment Roster

Summit Drilling customers are privy to one of the largest and most diverse equipment fleets in the drilling industry. Environmental engineering firms benefit from this wide range of capability, as well as Summit’s ability to address multiple project requirements simultaneously.

Click on any piece of equipment listed below for dimensions, capabilities and brief notations on its use.

MRS-50 (50K Head Roto-Sonic Crawler)

Sonic Drilling Power

50k drill head including tilt frame
50.000 lbs of sonic output force
0-150 Hz Sonic frequency
0-140 RPM rotation
5,250 ft-lb CW rotation torque @ 0-140 RPM
7,000 ft-lb CCW rotation torque @ 0-140 RPM
0-90 degr. tilt capacity

Rig

Limited access track
Height 34’
Width 89”
Weight 40,000lbs
High pressure water pump 19 l/min @ 210 bar / 5 gpm @ 3,045 PSI
FMC Bean Mud pump 160 l/min @ 45 bar / 42 gpm @ 652 PSI
Aluminum water tank 500 liter / 132 gallon
Mechanical separators among different rod layers
Casing or drill rod storage – 210’ of 6 5/8 casing
Fully automated rod or casing handler

Capabilities

Push Ahead water sampler
3.5” rock coring
3” Shelby tubes
4” continuous 10’ sampling, 6” boring, 2” well to 500’
4” continuous 10’ sampling, 8” boring, 4” well to 300’
4” continuous 10’ sampling, 10” boring, 6” well to 200’

CRS-32 (32K Head Roto-Sonic Crawler)

Sonic Drilling Power

Sonic vibration oscillator output force 22,480 lbf (synchronized). Frequency 0 – 150 Hz.
2 eccentrics, mechanically synchronized
Rotation torque: clockwise 1,254 ft lbf @ 2,180 PSI, 0-120 rpm
Rotation torque: anti clockwise 1,475 ft lbf @ 2,450 PSI

Rig

Limited access track
Height 33’
Width 89”
Weight 30,000lbs

Capabilities

Push Ahead water sampler
3” Shelby tube
Water pump for AquaLock sampling, 5 gpm @ 3,000 PSI
Flow pump for drilling, 42 gpm @ 650 PSI
3” continuous 5’ sampling, 6’ boring, 2” well to 250’
3” continuous 5’ sampling, 8” boring, 4” well to 200’

SRS-20 (20K Head Roto-Sonic Crawler)

Sonic Vibration Oscillator Output Force 100kN @ 0-150 Hz/22480/22,480
2 Eccentrics, mechanically synchronized
Rotation Torque: Clockwise 1,245ft-lbf @ 2,175 PSI, 0-120 RPM
Rotation Torque: Counter Clockwise 1,475 ft-lbf @ 2,540 PSI, 0-120 RPM

Rig

Limited access track
Height 17.9’
Width 57”
Weight 14,000lbs
Kabuto 4 cylinder water cooled engine 100 hp
Fuel tank (diesel) 83 litre / 22 gallon
Load sense hydraulic system
Control panel on turning arm
High pressure water pump 19 l/min @ 210 bar / 5 gpm @ 3045 PSI
Aluminum water tank 300 liter / 79 gallon
Casing Rack
Water pump for drilling
Water tank

Capabilities

Discrete water sampler
Water pump for AquaLock sampling, “soft sediment sampling”
2” continuous sampling, 4” boring to 100’
3” continuous 5’ sampling, 6” boring, 2” well to 100’

(2) Reichdrill T650W-II (Air)

Dimensions: 34’ l x 9’w x 42’h/65,000lbs.
Capabilities: Air Rotary/Mud Rotary

Scenarios of Use

Deep well installation (~1000’) in consolidated rock formations using percussion hammer or tri-cone bit

(2) Diedrich D-120 (Mud/Auger)

Dimensions: 35’l x 9’w x 35’h/48,000lbs.
Capabilities: Mud rotary, hollow stem augers, with split spoon sampling, rock coring

Scenarios of Use

Shallow well installation (~200’) in unconsolidated formations using hollow stem augers with split spoon sampling
Mud rotary to (~300’) with split spoon sampling in unconsolidated formations
HQ/NQ rock coring to (~600’) in consolidated formations

(4) Geoprobe 7822DT Track (Direct Push)

Dimensions: 11’l x 5’w x 15’h/7,555lbs.
Capabilities: Direct Push (6’ stroke), mud rotary, air rotary, hollow stem auger.

Scenarios of Use

Rubber track – ideal for off road and in building/facility operations
Direct push up to 200’ for soil, groundwater investigation
Shallow well installation (~100’) in unconsolidated formations using hollow stem augers
Shallow well installation (~50’+) in consolidated formations using air rotary

(3) Geoprobe 6620DT Track (Direct Push)

Dimensions: 10’l x 4’2″w x 13’h/4,500lbs.
Capabilities: Direct Push (5’ stroke), mud rotary, air rotary, hollow stem auger

Scenarios of Use

Rubber track – ideal for off road and in building/facility operations
Direct push up to 200’ for soil, groundwater investigation
Shallow well installation (~50’) in unconsolidated formations using hollow stem augers
Shallow well installation (~50’) in consolidated formations using air rotary
Shallow well installation (~100’) in unconsolidated formations using air rotary

Geoprobe 5410 Truck (Direct Push)

Dimensions: 18’l x 9’w x 10’h/15,000lbs.
Capabilities: Direct Push (4’ stroke)

Scenarios of Use

Direct push up to 100’ for soil, groundwater investigation

Geoprobe 420M Probe Unit (Direct Push)

Dimensions: 28”l x 24”w x 8’h/375lbs.
Capabilities: Direct Push (3’ stroke)

Scenarios of Use

Rubber tire single axle/ideal for indoor use and tight areas/must have separate liquid fuel power unit
Direct push up to 20′ for soil, groundwater investigation

(3) Dingo/Geoprobe 5400 Rubber Track Unit (Direct Push)

Dimensions: 8’l x 44”w x 9’h/12,000lbs.
Capabilities: Direct Push (4’ stroke)

Scenarios of Use

Direct push up to 20’ for soil, groundwater investigation
HSA 4 ¼ to ~20’